Electric Bike Kit 3000W — Rear Hub Motor for 26" and 27.5" Wheels

The most powerful kit in the All4eBikes range — a brushless gearless direct-drive 3000W motor with ~110 N.m torque and a 60A 18-MOSFET controller. Engineered for extreme-performance builds: technical off-road, steep gradients, maximum loads and intensive use. Complete kit, ready to fit on 26" and 27.5" wheels.

What's Included

• 3000W brushless gearless direct-drive motor, laced into rear rim
• 60V/72V 60A controller with 18 MOSFETs, dual Hall / non-Hall mode
• LCD display with speed, total km, battery level and PAS assist level
• Full-twist throttle
• Brake levers with automatic motor cut-off sensor
• PAS sensor
• Complete wiring harness and mounting hardware

Available for 26" and 27.5" wheels. Standard 135mm rear axle. Operating temperature: -20°C to +45°C.

Direct-Drive at 3000W: ~110 N.m, ~90.5% Efficiency

No gears, no friction parts — power transfer is purely magnetic, directly from stator to wheel. Motor efficiency of ~90.5% means the vast majority of battery energy becomes forward motion, not heat. Operating noise under 60 dB even at full load. Sealed casing for all-weather use including heavy rain and mud.

Why Rear Hub and Not Front at 3000W

At 3000W, front-wheel drive would overstress the fork and severely compromise steering control. The rear hub motor delivers force to the drive wheel, providing stable traction, controlled acceleration and predictable handling on any surface — tarmac, gravel, mountain trails or technical off-road.

Dual-Mode 60A Controller — Maximum Reliability

The 60A controller switches automatically from Hall to non-Hall mode on any sensor fault — the motor continues running without interruption. At 60A maximum current, throttle response is immediate and linear from zero to full load.

Who This Kit Is For

The 3000W kit is chosen by advanced custom e-bike builders who prioritize maximum power, technical off-road riders on trails with gradients above 30%, and users with extreme traction and torque requirements. All components for build customization are available in the eBike parts section.

Recommended Battery

The 3000W kit requires 60V or 72V and a minimum of 20Ah for acceptable range, 40Ah for longer rides. We recommend the 72V 20Ah Triangle Battery as the starting point — correct voltage, frame triangle mounting and integrated LCD display. For higher capacities, browse all options in the eBike batteries category.

Parts and Other Kits

Replacement parts, alternative controllers and accessories are available in the eBike parts section. If 3000W exceeds your requirements, compare all options in the conversion kits range — from 250W to 3000W.