Description
What is included in the 1000W conversion kit
Complete 1000W conversion kit — 9 components, torque arms included. Fitting takes 2–3 hours.
Battery and charger are not included — you add them when ordering, from this kit's optional batteries: see the batteries. For fitting you only need ordinary tools (2.5 / 3 / 5 mm hex keys, an adjustable spanner and a screwdriver).
The 1000W kit is the point where a conversion stops being assistance and becomes real propulsion: up to 40 N·m of torque delivered straight into the wheel hub, speeds of up to 50 km/h and sustained power on gradients of 5–20% without dropping off. The brushless gearless direct-drive motor has no gears to wear out and no brushes to replace, and the 25A controller with 18 MOSFETs gives it the headroom it needs not to choke under load.
1000W technical specifications
Motor parameters
Electrical components
Fitting and compatibility
Why the kit needs torque arms, and why they come included
At 1000W the motor delivers up to 40 N·m straight onto the wheel axle – enough, over time, to start turning the axle in its dropout seat if it is not fixed additionally. The phenomenon is called a spun axle and, left untreated, it widens the dropout and can damage the frame beyond repair, especially on aluminium.
At this power the torque arm is mandatory, whatever the frame material. That is why the kit ships with two torque arms included, rather than sold separately as an accessory: they clamp to the frame and take the load off the axle. Fitting takes 10–15 minutes per side and needs no special tools.
25A controller with 18 MOSFETs
The 25A and the 18 MOSFETs are the reason this kit sustains effort on long climbs without losing power. The controller normally works with the motor's Hall sensors, and if a sensor fails it switches automatically to non-Hall mode so you are not left stranded. The brake levers cut power to the motor instantly at the first touch.
What the 1000W kit does best
Loaded cargo bikes
Carries real weight without losing speed uphill. The 40 N·m of torque is felt most when pulling away with a load.
Long climbs
Constant power on gradients between 5 and 20%, with no overheating on extended ascents.
Upgrading from 500W
The next step when 500W is no longer enough: 33% more torque and around 15 km/h more speed.
Choosing the battery
The kit ships without a battery. When ordering you can add one of the batteries below, chosen for this kit, all with a key lock and charger included. You can see more in the e-bike batteries category.
Recommended batteries for this kit
48V 17.5Ah Downtube Battery
48V 22.5Ah Downtube Battery
52V 24Ah Downtube Battery
52V 20Ah Triangle Battery
48V 20Ah Triangle Battery
1000W or 1500W? When it is worth going up
1000W covers a loaded cargo bike and long climbs, at speeds of up to 50 km/h. If you carry heavy loads constantly, climb very steep gradients or want reserve beyond that speed, the 1500W kit is the next step. Bear in mind that every step up in power also calls for a battery to match, so budget for that cost in advance.
Warranty and spare parts
The motor carries a 24-month warranty and the electronic components 12 months. Spare parts and accessories are available in the eBike parts section. Compare every power option in the conversion kits category, from 250W up to 3000W.
Frequently asked questions about the 1000W kit
Is the battery included in the kit?
Do you offer kit installation in Bucharest?
Are the torque arms included or sold separately?
What range does the 1000W kit give?
Can the 1000W kit handle a loaded cargo bike?
What is the difference from the 500W kit?
Which batteries can I add to the 1000W kit when ordering?
Which wheel size should I choose?
Details
Recommended products
What customers are saying
Prima data cand m-am urcat pe bicicleta cu kitul montat, senzatia a fost ca atunci cand m-am urcat prima data pe o trotineta electrica, dar inmultita cu 3.
Il recomand tuturor celor care vor sa-si faca viata pe bicicleta mai usoara si sa economiseasca o gramada de timp.
Recomand!
